
Adjustable Proportioning Valve With 2lb & 10lb Residual Valve Kit Disc-Drum
A-Team Performance Adjustable Universal Hot Rod Proportioning Valve and Residual Valves
Adjustable proportioning valves essentially pressure reducing valves and are often utilized in disc/drum, disc/disc, and drum/drum braking systems.
The valve is used to control front-to-rear brake pressure bias and will work for all types of vehicles. Install this valve between the distribution block and the rear flex hose in the front-to-rear rigid brake line.
Always use tube wrenches to tighten fittings properly.
The final settings of this valve will depend on your particular vehicle and individual preference.
Kit Includes:
- 2lb. residual valve
- 10 lb residual valve
- Adjustable Proportioning Valve
- Disc/drum application
- The adjustable valve has 3/8-24 IFF fittings.
SPECIFICATIONS
“IN” (Stamped on the valve) – Rigid brake line from the distribution block to this port. On early cars: the master cylinder rear port to this port.
“OUT” (Stamped on the valve) – Rigid brake line to the rear flex hose.
“DECREASE” – Reduces the brake line pressure to the rear brakes.
“INCREASE” – Increases the pressure to the rear brakes.
Maximum pressure regulation: 300 psi. Inlet port of valve: 1/8 – 27 NPT
Standard adaptors: 3/8” – 24 for 3/16” line.
Mounting hole diameter: .250” (two).
Please Note:
- If you need two 10lb. or two 2lb. or combination of two please let us know when you check out in the notes section.
Approximately 2 lbs.
FREE SHIPPING IN THE CONTINENTAL USA!